Qingdao Xiangfeng Copper Co. Ltd.

Precautions for using the slow wire cutting machine:
1、 Before use, turn on the main power supply and check the operation of the motor. There is no obvious abnormality in the appearance of oil and gas, and there is no deformation in the appearance of the tool. If there is any problem, handle it in time.
2、 Confirm that the operating pressure of the slow thread machine is controlled within the correct range, and take effective protective measures such as lubrication during blanking, or add appropriate coolant to reduce the cutting strength, so as to reduce various undesirable phenomena and improve the processing quality.
3、 Ensure the correct cutting parameters, maintain the uniformity of cutting speed, and ensure the uniform wear of the tool. If using the chemical child, pay attention to replace the chemical child as needed to maintain the processing quality, so as to prevent the change of cutting parameters caused by excessive wear.
4、 During operation, pay attention to personal safety, especially the movement speed of processed materials, so as not to endanger personal safety.
5、 Before operation, please carefully study the machining process on the machining drawing and slowly find out the cutting parameters to obtain better machining results.
6、 During operation, special attention should be paid to the stability of the slow wire cutting machine, and sudden movement or rotation is prohibited to avoid force majeure and unexpected safety risks.
7、 After use, clean the working area and check the main appearance parts to ensure safety and reliability.
8、 During the use of the WEDM, the pump oil and hydraulic oil should be replaced regularly, and the lubrication of all parts of the machine should be checked regularly to ensure the normal operation of the machine and its tools and extend the service life.
9、 During the operation of the slow-moving wire cutting machine, the cutting waste should be cleaned regularly to avoid accumulation, so as not to affect the processing accuracy.
10、 Regularly check the safety devices on the machine to ensure reliable safety protection at every step of the work, so as to reduce the hazards caused by the machine failure.